The warm water is the general term for the warmth of all the heat changing or refrigerating the medium.It is different from the steam that is limited to heating. Refrigeration has become another significant advantage of water heating, expanding the scope of use.Water heating is mainly composed of heat sink, shaft flow, shutters, etc.
When the hot water heating wind motor is wiring, according to the following steps:
Disgle power: Before the wiring, be sure to disconnect the power to ensure safety.
Determine the position of the wiring box: Find the wiring box of the warm wind motor, usually on the side of the motor.
Distinguish the color of the wire: According to the logo on the wiring box, distinguish the fire line (usually red or black), zero line (usually blue or white) and ground wires (usually yellow -green).
Wiring: On the "L" or "Fire" wiring terminal of the cable connection box, connect the zero -wire connection to the "n" or "zero" wiring terminal of the wiring box, and connect the ground wire to the "E of the E -line box to E.Or "ground line" wiring terminal.Pay attention to the screws on the wire terminal to ensure good contact.
Check the wiring: After the wire is connected, check whether the wiring is firm, whether there are some wire parts, and whether there is a short -circuit or connecting line.
Test operation: After ensuring that the wiring is correct, the power can be connected to test whether the warm air motor is running normally.If abnormal conditions are found, power off should be disconnected immediately.
It should be noted that when the wiring, you must follow the logo on the wiring box. Do not wiring or change the wiring method at will, so as not to cause motor damage or safety accidents.At the same time, if you are not familiar with motor wiring operations, it is recommended to seek help from professionals.