Operating process:
1. When the leaf wheels rotate, the gas enters the impeller from the axis direction of the air inlet.
2. The guide leaf transforms the deflection air flow into axial flow. At the same time, the gas is introduced into the voltage tube, and the gas kinetic energy is further converted into pressure energy. The work tube is introduced. The leaves can be fixed or around the vertical axis.
3. It can change the angle or spacing of the blade is one of the main advantageous fans of the axial flow fan.
4. Little leaves have lower flow to the angle, and the increase can generate higher flow.
Axial flow fans are usually used in occasions with high traffic requirements and lower pressure requirements. The axial flow fans are fixed and the air moves. The axis fans are mainly composed of fan impeller and case. The structure is simple but the data requirements are very high.
The shaft flow fan is very wide, that is, the airflow in the same direction as the axis of the wind, such as an electric fan, the air -conditioning fan fan of the axis fans is a shaft flowing method.Follow the fan shaft.
The transmission method of the axial flow fan is commonly used in the motor direct connection, and the triangular tape transmission and the linkage of the bearing are connected.
Type A: The motor is straight, and the fans are directly installed on the motor shaft, which is generally used by small machine numbers.
Type B: Bringing wheel transmission, with wheels in the middle of the two bearing.
Type C: Bringing wheel transmission, one end of the cantilever of the wheel arm, and the cantilever of the leaf wheels is installed on the other end of the main axis.
The above is the common transmission method of the operation process of the axis flower