The maintenance and maintenance of centrifugal air screens is essential to ensure its normal operation and extend the service life.The following is a detailed maintenance and maintenance guide:
1. Clean regularly
1. External cleaning: It is recommended to clean up the equipment once a day to ensure that there are no debris, dust and dirt on the surface of the equipment.Wipe the surface of the device with a soft cloth to avoid directly rinse with chemical cleaner or water.
2. Internal cleaning: Wind wheels and motors of hot wind curtain once a month.Disassemble all debris and use soft brush to clean up all magazines and flying dust to keep the air open and prevent dust accumulation.
2. Filter replacement and cleaning
1. Filter cleaning: Filter is an important part of a centrifugal air screen. It should be cleaned regularly to ensure its filtering effect.It is recommended to clean the filter every two weeks. When cleaning, a soft brush or a vacuum cleaner can be used to remove dust.
2. Filter replacement: If the filter is damaged or severely blocked, a new filter should be replaced in time.The new filter should ensure that it is matched with the equipment model and is installed correctly according to the manual.
Third, motor and line inspection
1. Check the motor and lines of the thermal curtain regularly to ensure that it is not damaged, loose and leakage.If the problem is found, it should be repaired or replaced in time.
2. For motor bearing lubrication, it is recommended to check once a quarter and lubricate treatment as needed.
Fourth, pay attention to waterproof
1. The centrifugal air curtain should be avoided in contact with the water source to avoid damage to moisture.During the use, if the equipment is found to be humid and leaking, it should be stopped for inspection and repair in time.
2. Regularly check the sealing materials of the equipment. If it is damaged or aged, it should be replaced in time.
5. Other maintenance matters
1. Wind leaf correction: Make correction of wind leaves every six months to ensure its normal operation and reduce noise.
2. Hot exchanger cleaning: Special maintenance of the heat exchanger once a year, cleaning the dust and dirt in it to ensure the heating effect.
3. Safe use: When using a centrifugal air screen, pay attention to safety, avoid childrens touch or misunderstanding, and ensure personal safety.
The above is the maintenance of the centrifugal curtain machine