Environmental protection GS thermal water heating is a heating equipment widely used in industrial plants, workshops, greenhouse breeding and other fields.
The use of GS hot water heater can be summarized as the following steps:
1. Installation and placement:
Select the flat floor to install to ensure that the heater is stable and stay away from flammable items and water sources to avoid hidden safety hazards.
The warm air machine should be placed at a certain distance from the wall to avoid the indoor temperature of the indoor unevenness.
2. Connect the power supply and water pipe:
Insert the power plug into the socket to ensure that the power supply is connected, and check the safe connection of the power cord to avoid hidden dangers such as leakage.
If necessary, make sure that the interface should be tight when connecting the water pipe to prevent leakage.
3. Add water and boot:
Before use, add an appropriate amount of water to the water tank of the heaters. Be careful not to exceed the larger capacity of the water tank to prevent overflow.
After connecting the power, press the power switch and start working.
Fourth, temperature and air volume adjustment:
The temperature can be set by the control panel and adjusts according to needs to meet the needs of personal heating.
The air volume can also be adjusted through the control panel. The large air volume is suitable for rapid heating, and the amount of small air is suitable for soft heating.
Fifth, operation after use:
After use, first turn off the water inlet valve (if applicable) and the power switch to ensure safe power off.
If it is not used for a long time, it is recommended to clean the water inside the heater to prevent rust or corrodes internal parts.
6. Maintenance and maintenance:
Clean up the dust and debris around the heater to ensure its normal operation.
Replace the air filter (if you are equipped) to ensure the amount of air inlet and heating.
Avoid foreign objects from entering the machine, and found that abnormal sounds or odors should be stopped immediately and contacted professionals for maintenance.
Follow the above steps and precautions to ensure the normal operation of the GS hot water heater while ensuring safety.