The so -called high -temperature steam heating is relatively steam -type heating. Generally, it refers to the temperature tolerance of the motor.When the ambient temperature is higher than 45 ° C or humid, it is necessary to use high temperature to ensure warmth and service life. Therefore, its applicable place is very clear, and the environmental temperature is higher than 45 degrees heating, ventilation, and drying places.1. Dry house.The material should be reached to a certain amount of dehydration. There are requirements for the temperature of the drying house. Most of the time, the environmental temperature of the drying house exceeds 45 degrees. Therefore, it is necessary to use high -temperature steam to warm it. The most commonly used model is HQ.HQ -type professional drying heating is mainly composed of CSF type high -temperature axis flow and hot -dip galvanized steel shelter. It is suitable for drying houses with a temperature below 120 ° C.When gases, it can be used as a circular drying.The main principle of heat dissipation is forced flow heat dissipation, so the indoor temperature is even more uniform.2. Factory heating and ventilation.In winter, due to low temperature, in order to improve production and life efficiency, heating will be used. At this time, although the environmental temperature does not meet the requirements of high -temperature steam heating, the environment is humid, and the general warmth resistance to high temperature resistance is weak, and it is difficult to meet the requirements.In the same way, there are mine ventilation. In winter, through the new wind outside the well, it is continuously replenished to the underground well, so that the cold cold air in the north will be heated to 2 ° C, which avoids the icing at the well and causes hidden dangers.