There may be many reasons for the tall space that you cant warm the wind. The following are some common situations:
1. Wose blade swing fault: If the swing blades of the high space heaters drive the motor damage, the air supply surface of the fan will become very small.At this time, it is recommended to send the heater back to the factory for repair or find a special person for repair.
2. Remote control failure: If the remote control of the heater fails, the fan may not respond after pressing the remote control.In this case, you can try to press the switch on the body to start the fan.
3. Excessive protection: Many heater are equipped with overheating protectors.When the heater is overheated, it automatically power off to avoid damage.If this is encountered, you can transfer the heater to a place with large heat dissipation space, and then reopen after it cools.
4. Vancouct blocking: If the heaters have been used for a long time, it may cause the air duct to block, which will affect the effect of the air.It is recommended to regularly clean up the air duct of the heaters to ensure its normal work.If you cannot solve the problem, it is recommended to seek the help of professionals.
5. Breakthrough: In some cases, due to multiple tests or other reasons, the family fuse may be disconnected, resulting in the heater that the heater cannot be heated.At this time, you need to check the state of the fuse. If necessary, replace it in time.
6. Circuit board failure: If the circuit board fails, the heater may not work properly.You can try to directly press the switch of the heater to observe whether the temperature displayed on the temperature rises.If it cannot rise, it may be a circuit board failure.In this case, it is recommended to ask professional maintenance personnel for inspection and maintenance.
Please note that the above is only some possible reasons. The specific reasons may be different due to factors such as equipment models, environmental and usage.If the heater is not out of wind, it is recommended to check the instruction manual first, understand the correct operation method, and then try some basic fault exclusion steps.If the problem still exists, it is recommended to contact professional maintenance personnel for inspection and maintenance.
The above is the reason why the tall space thermal turbine is not windy