The WEXD wall row is a key step to ensure its normal operation and extend the service life.Here are some maintenance suggestions:
1. Regular inspection: The operating status of the fan should be checked regularly, including whether the blades are loose, whether the gap between the air cylinder is normal, whether the connection bolt between the motor and the case is tight, and whether the rotor reduction seat and the foundation are intact.These inspections help discover problems in time and deal with them.
2. Cleaning work: It is very important to regularly remove the area of ??the blanket blade surface ash and dirt. This can not only improve the ventilation efficiency of the fan, but also prevent corrosion and extend the service life.At the same time, it is necessary to keep the fan inlet and export cleaning, and there should be no miscellaneous objects.
3. Lubrication maintenance: It should be regularly changed to the motor bearing to change the fat to ensure that the fan maintains a good lubrication state during the operation.The replacement cycle of lubricating fat can be determined according to the actual situation and the use environment, but it is generally recommended to add oil at least once every three months.
4. Electrical system inspection: Regularly check all components of the electrical system, including whether the wires, sockets, switches, etc. are working properly, whether it is overheated or damaged.This helps to prevent electrical failures and ensure the safe operation of the fan.
5. Environmental control: The use environment should be kept neat, and the fan should be stored in a dry environment to avoid the moisture of the motor.If the fan is stored in the open air, there should be rain prevention measures.
In addition, if the fan has abnormal sounds, severe heat fever, charging, and switching to the cards during the operation of the fan, it should be stopped immediately and seek help from professionals.After the maintenance, the trial movement should be performed to confirm that there is no abnormal phenomenon before starting.
Please note that the specific maintenance cycle and steps may be different due to the equipment model, the environment and the manufacturers suggestions.Therefore, during maintenance, better participation in the instructions or consulting manufacturers to obtain more accurate guidance.
The above is the maintenance of the wexd side wall exhaust device